The maximum number of products that can be compared is 4. Please refine your selection.
Glue and Paste
Shop By Category
Results 1Â - 12 of 20 in
-
-
Product Code: 7004798
- Type: Glue stick
- Acid free: Yes
- Chemical base: Modified starch
- Colour after curing/drying: Transparent
- Consistency: Wax-like mass
- Drying/Curing time: 45 seconds
- Solvent free: Yes
- Washable: Yes
- pH-value: 10.5
- Suitability: Suitable for gluing paper, cardboard, photos, Styrofoam (expanded polystyrene), labels, textiles, etc.
- Storage: Store in a dry, cool and frost-free place
- Surface requirements: Materials to be glued must be clean, dry and free from dust and grease. One of both surfaces must be absorbent
- Directions for use: Applied with light pressure onto the materials to be glued. The parts are put together immediately after applying the glue
- Stains/residue: Washed out with cold water
- Size: 21g
- Colour: Transparent
- Dimension: 27 x 27 x 108mm
- OEM: 3300065
-
Product Code: 7007281
- Type: Glue stick
- Acid free: Yes
- Chemical base: Modified starch
- Colour after curing/drying: Transparent
- Consistency: Wax-like mass
- Drying/Curing time: 45 seconds
- Solvent free: Yes
- Washable: Yes
- pH-value: 10.5
- Suitability: Suitable for gluing paper, cardboard, photos, Styrofoam (expanded polystyrene), labels, textiles, etc.
- Storage: Store in a dry, cool and frost-free place
- Surface requirements: Materials to be glued must be clean, dry and free from dust and grease. One of both surfaces must be absorbent
- Directions for use: Applied with light pressure onto the materials to be glued. The parts are put together immediately after applying the glue
- Stains/residue: Washed out with cold water
- Size: 40g
- Colour: Transparent
- Dimension: 30(w) x 30(d) x 110(h)mm
- OEM: 3300070
-
Product Code: 7003501
- Type: Glue stick
- Acid free: Yes
- Chemical base: Modified starch
- Colour after curing/drying: Transparent
- Consistency: Wax-like mass
- Drying/Curing time: 45 seconds
- Solvent free: Yes
- Washable: Yes
- pH-value: 10.5
- Suitability: Suitable for gluing paper, cardboard, photos, Styrofoam (expanded polystyrene), labels, textiles, etc.
- Storage: Store in a dry, cool and frost-free place
- Surface requirements: Materials to be glued must be clean, dry and free from dust and grease. One of both surfaces must be absorbent
- Directions for use: Applied with light pressure onto the materials to be glued. The parts are put together immediately after applying the glue
- Stains/residue: Washed out with cold water
- Size: 8g
- Colour: Transparent
- Dimension: 20 x 20 x 80mm
- OEM: 3300060
-
-
Product Code: 7097639
- Type: Glue Stick
- Acid-Free: Yes
- Container: 58% plant-based raw materials
- Glue formula: 98% natural ingredients
- Chemical base: Modified starch
- Colour after curing/drying: Transparent
- Consistency: Wax-like mass
- Drying/Curing time: 45 seconds
- Solvent free: Yes
- Washable: Yes
- pH-value: 10.5
- Suitability: Suitable for gluing paper, cardboard, photos, Styrofoam (expanded polystyrene), labels, textiles, etc.
- Storage: Store in a dry, cool and frost-free place
- Surface requirements: Materials to be glued must be clean, dry and free from dust and grease. One of both surfaces must be absorbent
- Directions for use: Applied with light pressure onto the materials to be glued. The parts are put together immediately after applying the glue
- Stains/residue: Washed out with cold water
- Size: 40g
- Dimension: 30(w) x 30(d) x 110(h)mm
- Colour: Transparent
- OEM: 33-00047
-
Product Code: 7096349
- Dimension: 7.2 x 100mm
- Colour: Clear
- Pack of 10 sticks
- OEM: 85-010101
-
-
Product Code: 7101269
- Materials to be glued must be clean, dry and free from dust and grease
- Open the integrated cap, position the roller on the material you want to bond and pull it back while you press down
- The glue is applied with gentle pressure and the soft, extra wide waltz ensures an even contact pressure and therefore a better application
- Immediately put together the two parts to be glued
- A loose tape can be retightened by adjusting the tape tightening screw
- UHU GLUE ROLLER can be easily washed out with cold water
- Store in a dry, cool and frost-free place
- This pack includes 1 UHU Glue Roller in a handy blister pack
- OEM: 33-50465
-
Product Code: 7101271
- Do not use at temperatures below +5C
- Materials to be glued must be clean, dry and free of dust and grease
- For non-absorbent materials (e.g. ceramic, coated papers), apply to both sides of the assembly, leave to dry, re-apply and press the parts together
- Contains volatile, highly inflammable solvents
- Appropriate precautions should therefore be taken during storage or when working with the adhesive
- Stains/residue
- Remove wet glue stains immediately
- Dried glue residue and glue stains in clothing can be removed with acetone
- Storage conditions: Store in a dry, cool and frost-free place
- box for easy storage
- This pack includes 1 UHU All Purpose Adhesive Liquid 125ml in a handy box for easy storage
- OEM: 33-41815
-
Product Code: 7101275
- Suitable for assembling all kinds of (building) materials such as wood, stone, concrete, metal, many synthetics and polystyrene foam porous onto (porous) surfaces of stone, concrete, wood, plaster, drywall, etc
- Also very suitable for surface bonding, it improves the initial bond strength
- Very suitable for mounting timber framework, skirting boards, doorsteps, laths (wood / plastic), panelling, window sills, ceramic tiles, construction boards, drywalls, wood strips, wall covering sheets, panels, insulation, soft and hardboard, panels, sills, nameplates , house numbers, suspension hooks, ducts, electrical outlets and electrical boxes
- Also suitable for decoration materials, such as ornaments and mouldings in plaster, polyurethane and polystyrene foam
- Only apply at temperatures between +5C and +40C
- Close container properly and store in a dry, cool and frost-freeplace
- OEM: 33-37580
-
Product Code: 7101276
- If possible, apply at room temperature
- Materials to be glued must be clean, dry and free of dust and grease
- Contains volatile, highly flammable solvents
- Respective safety measures are to be taken regarding processing and storage
- When gluing larger areas, please ensure that the work area is well ventilated
- To remove adhesive residues and clean tools, butanone (MEK), ethylacetate and thinner for nitrocellulose lacquer should be used
- Adhesive residues cannot be removed from soft PVC films
- Store in a dry, cool and frost-free place
- OEM: 33-37655
Glue and Paste